Latest Notification

Latest Police/Defence Jobs Notification

Bihar Govt. Jobs

Odisha Job Update

UPSC ESE Exam Pattern

UPSC ESE Exam Pattern: Engineering Services Examination conducted by Union Public Service Commission (UPSC) is consists of two sections of written examination and Personality Test. Exam pattern of Engineering Services Examination are given below….

UPSC ESE Exam Pattern:

Engineering Services Examination comprises of two stages:
1. Written Examination
2. Personality Test 

I. Written Examination: The written Examination will comprise of three stages.

(i) Stage-I: Engineering Services (Preliminary/ Stage-I) Examination (Objective Type Papers) for the selection of candidates for the Stage-II: Engineering Services (Mains/ Stage-II) Examination.

(ii) Stage-II: Engineering Services (Mains/ Stage-II) Examination (Conventional Type Papers) and

(iii) Stage-III : Personality Test

2. The Engineering Services (Preliminary/ Stage-I) Examination will consist of two objective type (multiple choices) questions papers and carrying a maximum of 500 marks (Paper 1 – 200 Marks & Paper II – 300 Marks). Only those candidates who are declared by the Commission to have qualified in the Preliminary/ Stage-I Examination in the year will be eligible for admission to the Mains/ Stage-II Examination of that year provided they are otherwise eligible for admission to the Mains/ Stage-II Examination. The Marks obtained in Preliminary/ Stage-I Examination by the candidates who are declared qualified for admission to the Mains/ Stage-II Examination will be counted for determining their final order of merit. The number of candidates to be admitted to the Mains/ Stage-II Examination will be about six to seven time the total approximate number of vacancies to be filled in the year through this examination.

Note I : The Commission will draw a list of candidates to be qualified for Engineering Services (Mains/Stage-II) Examination based on the criterion of minimum qualifying marks in General Studies and Engineering Aptitude Paper (Paper-I) and Engineering Discipline specific paper (Paper-II) of Preliminary/Stage-I Examination.

Note II: There will be penalty (Negative Marking) for wrong answers marked by a candidate in the objective type question papers.
(i) There are four alternative for the answers to every question. For each question for which a wrong answer has been given by the candidate, one-third (0.33) of the marks assigned to that question will be deducted as penalty.
(ii) If a candidate gives more than one answer, it will be treated as a wrong answer even if one of the given answers happen to be correct and there will be same penalty as above for that question.
(iii) If a question is left blank i.e. no answer is given by the candidate, there will be no penalty for that question.
3.1 The Engineering Services (Mains/stage-II) Examination will consist two conventional type papers in Engineering Discipline specific with duration of three hours and maximum marks of 600 (300 Marks in each paper).
3.2 The Stage-III will consist of Personality Test carrying 200 Marks.
4.1 Candidates who obtain such minimum qualifying marks in the Stage-I: Engineering Services (Preliminary/Stage-I) and StageII: Engineering Services (Mains/Stage-II) Examination as may be fixed by the Commission as per its discretion, shall be summoned bythem for Stage-III (Personality Test). The number of candidates to be summoned for Personality Test will be about twice the number of vacancies to be filled. The Personality Test will carry 200 marks (with no minimum qualifying marks).
4.2 Marks obtained by the candidates in the Stage-I:(Preliminary/Stage-I) Examination, Stage-II:(Mains/Stage-II) Examination and Stage-III (Personality Test) would determine their final ranking. Candidates will be allotted to the various services keeping in viewtheir ranks in the examination and the preference expressed by them for the various services/posts.
5. Candidates are advised to read carefully special instructions to candidates for conventional type tests and objective type testsgiven in Appendix-III (Part A and Part B) including the procedure regarding filing in the Answer Sheet of objective type tests in theExamination Hall uploaded on the Commission’s website (www.upsc.gov.in) on 28.09.2016.
6. In the Personality Test special attention will be paid to assessing the candidate’s capacity for leadership, initiative and intellectual curiosity, tact and other social qualities, mental and physical energy, powers of practical application and integrity of character.
7. Conventional papers must be answered in English. Question paper will be set in English only.
8. Details of the syllabi for Stage-I: (Preliminary/stage-I) and Stage-II :(Mains/Stage-II) are at Section III

A. Stage-I (Preliminary/ Stage-I) Examination:
Subject  DurationMaximum Marks
Category-I Civil Engineering
Paper-I (General Studies and Engineering Aptitude)2 hrs200
Paper-II (Civil Engineering)3 hrs300
Total 500
Subject  DurationMaximum Marks
Category-II Mechanical Engineering
Paper-I (General Studies and Engineering Aptitude)2 hrs200
Paper-II (Mechanical Engineering)3 hrs300
Total500
Subject  DurationMaximum Marks
Category-III Electrical Engineering 
Paper-I (General Studies and Engineering Aptitude)2 hrs200
Paper-II (Electrical Engineering)3 hrs300
Total 500
Subject  DurationMaximum Marks
Category-IV Electronics and Telecommunication Engineering
Paper-I (General Studies and Engineering Aptitude)2 hrs200
Paper-II ( Electronics and Telecommunication Engineering)3 hrs300
Total 500

 B. Stage-II(Mains/Stage-II) Examination:- 
Subject  DurationMaximum Marks
Category-I Civil Engineering
Paper-I (Civil Engineering)3 hrs300
Paper-II (Civil Engineering)3 hrs300
Total 600
Subject  DurationMaximum Marks
Category-II Mechanical Engineering
Paper-I (Mechanical Engineering)3 hrs300
Paper-II (Mechanical Engineering)3 hrs300
Total 600
Subject  DurationMaximum Marks
Category-III Electrical Engineering
Paper-I (Electrical Engineering)3 hrs300
Paper-II (Electrical Engineering)3 hrs300
Total 600
Subject  DurationMaximum Marks
Category-IV Electronics and Telecommunication Engineering
Paper-I (Electronics and Telecommunication Engineering)3 hrs300
Paper-II (Electronics and Telecommunication Engineering)3 hrs300
Total 600

(C) Stage-III (Personality Test) – 200 Marks.
Note: Candidates must write the papers in their own hand. In no circumstances will they be allowed the help of a scribe to write the answers for them. However, blind candidates and candidates with Locomotor Disability and Cerebral Palsy where dominant (writing) extremity is affected to the extent of slowing the performance of function (minimum of 40% impairment) will be allowed to write Engineering Services Examination with the help of a scribe.
1. Compensatory time of twenty minutes per hour shall be permitted for the blind candidates and candidates with Locomotor Disability and Cerebral Palsy where dominant (writing) extremity is affected to the extent of slowing the performance of function (minimum of 40% impairment) will also be allowed in the Engineering Services Examination.
2. The Commission have discretion to fix minimum qualifying marks in any or all the papers of the examination.
3. Marks will not be allotted for mere superficial knowledge.
4. Deduction upto five per cent of the maximum marks for the written papers will be made for illegible handwriting.
5. Credit will be given for orderly, effective and exact expression combined with due economy of words in the conventional papers of the examination.
6. In the question papers, wherever required, SI units will be used. Note.—Candidates will be supplied with standard tables/charts in SI units in the Examination hall for reference purpose, wherever considered necessary.
7. Candidates are permitted to bring and use battery operated pocket calculators for conventional (essay) type papers only. Loaning or inter-changing of calculators in the Examination Hall is not permitted. It is also important to note that candidates are not permitted to use calculators for answering objective type papers (Test booklets). They should not therefore, bring the same inside the Examination Hall.
8.Candidates should use only International form of Indian numerals (e.g., 1, 2, 3, 4, 5 etc.) while answering question papers.

UPSC ESE Eligibility Details:



UPSC ESE Eligibility Criteria: Union Public Service Commission’s (UPSC) Engineering Service Examination eligibility details are given below….

UPSC ESE Eligibility:
I. Nationality: A Candidate must be either
i. a citizen of India, or
ii. a subject of Nepal, or
iii. a subject of Bhutan, or
iv.a Tibetan refugee who came over to India before the 01 January, 1962 with the intention of permanently settling in India, or
v. a Person of Indian origin who has migrated from Pakisthan, Burma, Sri Lanka and East African countires of Kenya, Uganda, the United Republic of Tanzania, Zambia, Malawim Zaire and Ethiopia or Vietnam with the intention of permanently setting in India.
Provided that a candidate belonging to categories (b), (c), (d) and (e) above shall be a person in whose favour a certificate of eligibility has been issued by the Government of India.

II. Age Limit: Candidates age should be between 21-30 years as on 01-01-2020. i.e., he/ she must have been born not earlier than 02-01-1990 and not later than 01-01-1999

Upper Age Limit Relaxation:
i. Upto maximum of 5 years if a candidate belongs to a Scheduled Caste or a Scheduled Tribe.
ii. 3 years in the case of candidates belonging to Other Backward Classes.
iii. 5 years if a candidate had ordinarily been domiciled in the State of Jammu and Kashmir during the period from the 01-01-1980 to the 31-12-1989.
iv. 3 years, in the case of Defence Services personnel, disabled in operations during hostilities with any foreign country or in a disturbed area, and released as a consequence thereof.
v. 5 years in the case of Ex-servicemen including Commissioned Officers and ECOs/ SSCOs who have rendered atleast five years Military Service.
vi. 5 years in the case of ECOs/ SSCOs who have completed an initial period of assignment of five years of Military Service as on 01-08-2018.
vii. 10 years in the case of deaf-mute and Orthopaedically handicapped persons.

III. Minimum Educational Qualification: Candidates must have:
i. Obtained a Degree in Engineering from a University incorporated by an Act of the Central or State Legislature in India or other Educational Institutions established by an Act of Parliament or declared to be deemed as Universities under Section 3 of the University Grants Commission Act, 1956; or
ii. passed Sections A and B of the Institution Examinations of the Institution of Engineers (India); or
iii. obtained a Degree/ Diploma in Engineering from such foreign University/ College/ Institution and under such conditions as may be recognised by the Government for the purpose from time to time, or
iv. passed Graduate Membership Examination of the Institution of Electronics and Telecommunication Engineers (India); or
v. passed Associate Membership Examination Parts II and III/Sections A and B of the Aeronautical Society of India; or

(IV). Physical Standards: Candidates must be physically fit according to physical standards for admission to Engineering Services Examination 2020.



UPSC ESE Selection Process Details:



UPSC ESE Selection Process Details: The candidates applying for the Engineering Services Examination should ensure that they fulfill all the eligibility conditions for admission to the Examination. The selection process for the Engineering Services Examination are given below….

UPSC ESE Selection Process:

Selection process will be done in three stages (i) Preliminary Test (ii) Mains Test (iii) Personality Test

I. Written Examination: The Engineering Services (Preliminary/ Stage-I) Examination will consist of two objective type (multiple choices) questions papers and carrying a maximum of 500 marks (Paper 1 – 200 Marks & Paper II – 300 Marks). Only those candidates who are declared by the Commission to have qualified in the Preliminary/ Stage-I Examination in the year will be eligible for admission to the Mains/ Stage-II Examination of that year provided they are otherwise eligible for admission to the Mains/ Stage-II Examination. The Marks obtained in Preliminary/ Stage-I Examination by the candidates who are declared qualified for admission to the Mains/Stage-II Examination will be counted for determining their final order of merit. The number of candidates to be admitted to the Mains/ Stage-II Examination will be about six to seven time the total approximate number of vacancies to be filled in the year through this examination. The Engineering Services (Main/stage-II) Examination will consist two conventional type papers in Engineering Discipline specific with duration of three hours and maximum marks of 600 (300 Marks in each paper).

II. Personality Test: Stage-III Personality test carrying a maximum of 200 marks of such of the candidates who qualify on the basis of the written examination.


UPSC ESE Syllabus Details:



UPSC ESE Syllabus Details: Union Public Service Commission (UPSC) Engineering Services Exam Syllabus is given below…

I. Civil Engineering (for both objective and conventional type papers)

Paper I
1.  Building Materials
2. Solid Mechanics
3.  Structural Analysis
4.  Design of Steel Structures
5.  Design of Concrete and Masonry Structures
6.  Construction Practice, Planning and Management

Paper II
1. (a) Fluid Mechanics, Open Channel, Flow, Pipe Flow
(b) Hydraulic Machines and Hydropower
2. (a) Hydrology
(b) Water Resources Engineering

Environmental Engineering
3. (a) Water Supply Engineering
(b) Waste Water Engineering
(c) Solid Waste Management
(d) Air and Noise Pollution and Ecology
4. (a) Geo-technical Engineering
(b) Foundation Engineering
5. (a) Surveying and Geology
(b) Transportation Engineering

II. Mechanical Engineering (For both objective and conventional type papers)
Paper I
1. Fluid Mechanics
2. Thermodynamics and Heat transfer
3. IC Engines, Refrigeration and Air conditioning
4. Turbo Machinery
5. Power Plant Engineering
6. Renewable Sources of Energy

Paper II
1. Engineering Mechanics
2. Mechanisms and Machines
3. Design of Machine Elements
4. Manufacturing ,Industrial and Maintenance Engineering
5. Mechatronics and Robotics

III. Electrical Engineering (for both objective and conventional type papers)

Paper I
1. Engineering Mathematics
2. Electrical Materials
3. Electric Circuits and Fields
4. Electrical and Electronic Measurements
5. Computer Fundamentals
6. Basic Electronics Engineering

Paper II
1. Analog and Digital Electronics
2. Systems and Signal Processing
3. Control Systems
4. Electrical Machines
5. Power Systems
6. Power Electronics and Drives

IV. Electronics And Telecommunication Engineering (For both objective and conventional type papers)

Paper I
1. Basic Electronics Engineering
2. Basic Electrical Engineering
3. Materials Science
4. Electronic Measurements and Instrumentation
5. Network Theory
6. Analog and Digital Circuits

Paper II
1. Analog and Digital Communication Systems
2. Control Systems
3. Computer Organization and Architecture
4. Electro Magnetics
5. Advanced Electronics Topics
6. Advanced Communication Topics

Post a Comment

 
Copyright © 2019 Job Update India